‟The best way of making your property less attractive to skunks is by reducing access to food, water, and shelter that the animals need. To scale back food sources, fallen fruit and spilled seed from bird feeders should be removed frequently. Garbage cans should have tight-fitting lids, and food items or table scraps shouldn’t be placed in compost bins; use the “hot” instead of “cold” compost method to process organic waste. Food placed outdoors for pets should be removed by nightfall. Intentionally feeding a wild skunk, even when through with good intentions, is never a good idea. Never DIY skunk removal. However, if you’re going to try it, arm yourself with the knowledge. Remember that skunk removal is dangerous. This blog will talk about skunk removal tips in Tampa, Florida: how to get rid of them. We do not encourage doing this on your own, but still, here are some tips for you to check out.
How to Get Rid of Skunks
One of the best ways in controlling the skunk population around your home is with habitat modification. The Statewide Integrated Pest Management Program within the Department of Agriculture and Natural Resources at the University of California (UC IPM) advises:
The skunk or its young may become hooked into the unnatural food source and lose their fear of people. This increases the prospect that an adult or child could also be bitten. Also, the skunk could also be trapped or killed when it wanders into another yard where it’s not welcome.
How to Get Rid of a Skunk in Your Home
In most cases, skunk removal is important underneath the house, instead of inside the house. Here’s the way to get rid of a skunk in both situations. The Missouri Department of Conservation notes:
‟If a skunk has already settled under a building or slab, block all openings except one. Place sand, lime, or kitchen flour round the opening, then check the opening subsequent day for tracks. If tracks indicate the animal is outside the den, seal the opening. Young skunks could also be present during May and June and sealing the opening would end in starvation and odor. If possible, keep pets away and permit the young to grow and abandon the den — typically by mid-August — then seal the opening.
If a skunk has fallen into a basement window well, wait until evening, then place a rough-sawn board or board with cleats tacked crosswise into the well at a shallow angle therefore the skunk can climb out. If a skunk has entered a garage or basement, leave doors open therefore the animal can wander out on its own after dark.”
The UC IPM has some helpful skunk removal tips to feature, especially when kits (baby skunks) are involved, advising:
‟Once skunks have made their home beneath a building, the matter may be a little harder because you’ve got to make certain the animals have left before blocking the opening. a method to work out this is often to sprinkle a smooth, 1/8-inch thick layer of flour just ahead of the purpose of the entrance to make a tracking patch. Examine the tracking patch soon after dark; the presence of footprints will indicate that the animal has left and therefore the opening is often closed. However, blocking the doorway is more problematic if there are several young left behind. If you’re unsure that each one of the skunks beneath a building has left, a one-way, outward-swinging gate are often fashioned which will allow any remaining skunks to go away but to not re-enter. This gate is often constructed from 1/2-inch mesh hardware cloth hinged at the highest of the frame and let loose on the opposite three sides. It must be larger than the opening in order that it can only swing outward. Skunks will push it hospitable leave but won’t be ready to push it inward to re-enter. This is often ineffective, of course, if the kits aren’t yet mobile; kits not yet ready to walk may need to be removed by other means. The location of 1 or more floodlights beneath the building facing outward through the skunk’s entry point will often assist in driving them far away from a location.”